No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Transparent Bridge

Configuring a Transparent Bridge

Context

To configure Layer 2 protocol transparent transmission, you need to configure a bridge group and add user-side and network-side interfaces of a PE to the bridge group.

Perform the following steps on the PE.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    bridge bridge-id

    A bridge group is created and the bridge group view is displayed.

    By default, no bridge group is configured.

  3. Run:

    quit

    Return to the system view.

  4. Add a user-side interface to the bridge group.
    1. Run:

      interface interface-type interface-number

      The interface view is displayed.

    2. Run:

      bridge bridge-id

      The interface is added to the bridge group.

      By default, no interface is added to the bridge group.

  5. Repeat step 4 to add a network-side interface to the bridge group.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 17495

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next