No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hybrid SEP+MSTP Ring Networking

Hybrid SEP+MSTP Ring Networking

As shown in Figure 13-12, Router1 to Router3 form a SEP segment to access the MSTP ring. The networking is called hybrid SEP+MSTP ring networking. Router1 to Router3 are at the access layer and transparently transmit Layer 2 unicast and multicast services. When SEP runs at the access layer, redundancy protection switching can be implemented at the access layer.

If the topology of the access layer changes, a node in the SEP segment sends a Flush-FDB packet to instruct other nodes in the SEP segment to update their MAC address forwarding tables and ARP tables. Router1 and Router2 at the edge of the SEP segment send a TC packet to notify the aggregation layer of the topology change in the SEP segment.

In hybrid-ring networking, no-neighbor edge interfaces need to be deployed on the edge devices of SEP networks, and the SEP networks need to report topology changes to MSTP networks.

Figure 13-12  Networking diagram of hybrid rings running SEP+MSTP

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 19865

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next