No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applicable Scenario

Applicable Scenario

This section describes the applicable scenario of the voice VLAN.

In Figure 7-2, PCs and IP phones connect to the Internet through switching device. Because the voice service is sensitive to the delay and jitter, the priority of voice data flows needs to be increased so that they can be preferentially forwarded when congestion occurs. The router adds the voice VLAN tag and assigns a higher priority to the VoIP traffic, so the VoIP traffic can be transmitted preferentially and voice quality is ensured.


The device cannot process untagged packets.

Figure 7-2  Applicable scenario of the voice VLAN

Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 19714

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next