No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

Table 3-3 describes the VLAN configuration tasks. Figure 3-18 illustrates the logical relationship between configuration tasks.

Figure 3-18  Logical relationship between configuration tasks
Table 3-3  VLAN configuration task summary
Configuration Task Description

Configuring VLAN Assignment

VLANs can isolate the hosts that do not need to communicate with each other, which improves network security, reduces broadcast traffic, and mitigates broadcast storms.

Configuring Inter-VLAN Communication

After VLANs are assigned, users in different VLANs cannot directly communicate with each other. If users in different VLANs need to communicate, configure VLANIF interfaces to implement inter-VLAN Layer 3 connectivity.

Configuring a Traffic Policy to Implement Intra-VLAN Layer 2 Isolation

After VLANs are assigned, users in the same VLAN can directly communicate with each other. If some users in the same VLAN need to be isolated, configure MQC-based intra-VLAN Layer 2 isolation.

NOTE:

Intra-VLAN isolation can also be implemented using port isolation. For details about port isolation, see Configuring Interface Isolation in Huawei AR Series IOT Gateway Configuration Guide - Interface Management.

Configuring a Traffic Policy to Implement Inter-VLAN Layer 3 Isolation

After VLANIF interfaces are configured to implement inter-VLAN connectivity, users in different VLANs can communicate at Layer 3. If some users in different VLANs require unidirectional communication or need to be isolated, configure a traffic policy.

Configuring an mVLAN

To use the NMS to manage devices in a centralized manner, assign VLANs and configure a VLAN as the management VLAN.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 15380

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next