No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

The device supports the manual load balancing mode and Link Aggregation Control Protocol (LACP) mode.

Table 2-2 lists the link aggregation configuration tasks.

Table 2-2  Configuration task summary of link aggregation
Item Description Task

Configure link aggregation in manual load balancing mode.

In manual load balancing mode, you must manually create an Eth-Trunk and add member interfaces to the Eth-Trunk. All active links forward data and evenly load balance traffic. The manual load balancing mode is often used when the remote device does not support LACP.

Configuring Link Aggregation in Manual Load Balancing Mode

Configure link aggregation in LACP mode.

In LACP mode, you must manually create an Eth-Trunk and add interfaces to the Eth-Trunk. LACP determines active interfaces by negotiating parameters in LACPDUs. LACP provides backup links and ensures high reliability of member links

Configuring Link Aggregation in LACP Mode

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 17036

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next