No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

Table 11-14 summarizes STP/RSTP configuration tasks.

Table 11-14  STP/RSTP configuration task summary
Task Description

Configuring Basic STP/RSTP Functions

Configure STP/RSTP on switching devices on a network to trim the network into a tree topology free from loops.

Setting STP Parameters that Affect STP Convergence

STP cannot implement rapid convergence. However, you can set STP parameters, including the network diameter, timeout interval, Hello timer value, Max Age timer value, and Forward Delay timer value to speed up convergence.

Setting RSTP Parameters that Affect RSTP Convergence

RSTP supports link type and fast transition configuration on ports to implement rapid convergence.

Configuring RSTP Protection Functions

You can configure one or more functions RSTP protection functions on a Huawei device.

Setting Parameters for Interoperation Between Huawei and Non-Huawei Devices

To implement interoperation between a Huawei device and a non-Huawei device, select the fast transition mode based on the Proposal/Agreement mechanism of the non-Huawei device.

Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 19769

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next