No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to Voice VLAN

Introduction to Voice VLAN


Voice VLAN is a technology that transmits voice data.


Data, voice, and video services are often transmitted simultaneously over a network. Packet loss and delay seriously affect the voice communication quality. Voice services, in particular, require a higher forwarding priority than data or video services. When bandwidth is limited, voice data must have transmission preference over other types of data. This can be done by configuring a voice VLAN on the switch to transmit voice data and setting QoS parameters in the voice VLAN so that voice data is given preference when congestion occurs.

Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 20351

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next