No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

Transparent bridges are widely used in Ethernet LANs because they are easy to configure and operate.

Table 15-2 lists the configuration task summary of Transparent Bridging.

Table 15-2  Configuration task summary of Transparent Bridging
Item Description Task

Configuring Local Bridging

Configuring local bridging allows users in the same geographical location and on the same network segment to communicate with each other.

Configuring Local Bridging

Configuring Local Bridging Integrated with IP Routing

Configuring local bridging integrated with IP routing allows users in the same geographical location but on different network segments to communicate with each other.

Configuring Local Bridging Integrated with IP Routing

Configuring Remote Bridging

Configuring remote bridging allows users in different geographical locations and on the same network segment to communicate with each other.

Configuring Remote Bridging

Configuring Remote Bridging Integrated with IP Routing

Configuring remote bridging integrated with IP routing allows users in different geographical locations and on different network segments to communicate with each other.

Configuring Remote Bridging Integrated with IP Routing

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 19854

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next