No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MLD Versions

MLD Versions

MLD has two versions:
  • MLDv1: corresponds to IGMPv2.
  • MLDv2: corresponds to IGMPv3.

MLDv1 defines the IPv6 multicast member query and report mechanism. The process is the same mechanism as IGMPv2. MLDv2 works similarly to MLDv1. The most significant difference between the two versions lies in that MLDv2 allows hosts to specify the multicast sources they do or do not want to receive messages from. The MLD versions are backward compatible. Therefore, a multicast router running MLDv2 can identify MLDv1 protocol messages.

Both MLD versions support the Any-Source Multicast (ASM) model. MLDv2 can be directly used in the Source-Specific Multicast (SSM) model; however, MLDv1 can be applied to the SSM model only when MLD SSM mapping is configured. For details about the ASM and SSM models, see Multicast Service Models.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 10096

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next