No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic MSDP Functions

Configuring Basic MSDP Functions


MSDP allows you to set up MSDP peers between the PIM-SM domains, and the MSDP peers exchange SA messages to share multicast source information.

Pre-configuration Tasks

Before configuring the basic MSDP functions, configure the multicast function in each Protocol Independent Multicast Sparse Mode (PIM-SM) domain.

Configuration Process

Enabling MSDP and Configuring MSDP Peers are mandatory and other tasks are optional.

Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 24042

Downloads: 23

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next