No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling SA Messages and the SA Cache

Controlling SA Messages and the SA Cache

Context

MSDP peers share (S, G) information by exchanging Source-Active (SA) messages. To control SA message transmission, you can configure the SA cache size, enable the local device to send SA request messages, encapsulate multicast data in SA messages, and configure policies to filter SA messages and SA request messages.

Pre-configuration Tasks

Basic MSDP functions have been configured. For details, see Configuring Basic MSDP Functions.

Configuration Process

The following configuration tasks can be performed at any sequence as required.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 10107

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next