No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Procedure

  • Run the display snmp-agent trap feature-name igmp all command to check the status of the IGMP trap function.
  • Run the display snmp-agent trap feature-name mld all command to check the status of the MLD trap function.
  • Run the display snmp-agent trap feature-name msdp all command to check the status of the MSDP trap function.
  • Run the display snmp-agent trap feature-name pim all command to check the status of the PIM trap function.
  • Run the display snmp-agent trap feature-name pim-std all command to check the status of the public PIM trap function.
Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 10092

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next