No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of MSDP

Monitoring the Running Status of MSDP

Context

During the routine maintenance, you can run the following commands in any view to learn the running status of MSDP.

Procedure

  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] brief [ state { connect | down | listen | shutdown | up } ] command to check brief information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-address ] command to check the detailed information about MSDP peers.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-address | source-address | [ as-number-plain | as-number-dot ] ] * command to check (S, G) information in the SA cache.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-count [ as-number-plain | as-number-dot ] command to check the number of (S, G) entries in the SA cache.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ peer peer-address | message-type { source-active | sa-request | sa-response | keepalive | notification | traceroute-request | traceroute-reply | data-packets | unknown-type } ] * command to check the statistics on the received, sent, and discarded MSDP packets.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] invalid-packet [ peer peer-address | message-type { keepalive | notification | sa-request | sa-response | source-active } ] * command to check the statistics on invalid MSDP packets received by a device.
  • Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] rpf-peer original-rp original-rp-address command to check information about all the RPF peers of the specified source RP address, including RPF peer selection rules and RPF route types.
Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 10098

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next