No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restricting the Number of IPv6 Multicast Forwarding Entries

Restricting the Number of IPv6 Multicast Forwarding Entries

Context

Excessive IPv6 multicast forwarding entries will exhaust the memory of the industrial switch router. To prevent this problem, set the limit on the number of entries in the IPv6 multicast forwarding table.

Default Configuration

Table 9-9 lists the default limit on the number of entries in the IPv6 multicast forwarding table.

Table 9-9  Default limit on the number of entries in the IPv6 multicast forwarding table
Parameter Default Setting

Limit on the number of entries in the IPv6 multicast forwarding table

64

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    multicast ipv6 forwarding-table route-limit limit-value

    The limit on the number of entries in the IPv6 multicast forwarding table is configured.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 9957

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next