No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to Multicast Network Management

Introduction to Multicast Network Management

With the increasingly wide application of IP multicast, the requirement for managing multicast networks becomes more exigent. After multicast network management is enabled, you can manage multicast devices using a Network Management Station (NMS).

By means of the Simple Network Management Protocol (SNMP), Multicast Management Information Base (MIB) manages multicast information exchanged between the NMS and agents. Multicast MIB supports the basic SNMP operations, such as Get-Request, GetNext-Request, Set-Request, and Trap.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 9372

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next