No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(S, G) Entries Are Not Generated After IGMP SSM Mapping Is Enabled

(S, G) Entries Are Not Generated After IGMP SSM Mapping Is Enabled

Fault Description

An interface is enabled with source-specific multicast (SSM) mapping and IGMP, and is configured with a static SSM mapping policy. The interface has received IGMPv1 or IGMPv2 Report messages, but multicast forwarding information base (MFIB) table does not contain the (S, G) entries matching the SSM mapping entries.

Procedure

  1. Check whether G in the (*, G) Report message is in the SSM group address range.

    Run the display this command in the PIM view to check the current configuration. If the command output displays "ssm-policy", the SSM group address range is redefined on the device.

    Run the display acl { acl-number | name acl-name | all } command to check the ACL configuration. Ensure that G is in the SSM group address range. By default, the SSM group address range is 232.0.0.0 to 232.255.255.255.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 9866

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next