No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Source Filtering

(Optional) Configuring Source Filtering

Context

When an IGMP proxy device needs to restrict multicast data packets from some multicast sources, configure a source filtering policy on the IGMP proxy device. Then the IGMP proxy device can filter multicast data packets based on source addresses or source and group addresses.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    igmp [ vpn-instance vpn-instance-name ]

    The IGMP view is displayed.

  3. Run:

    proxy source-policy { acl-number | acl-name acl-name }

    A source filtering policy is configured to filter received multicast data packets based on source addresses or source and group addresses.

    By default, an IGMP proxy device does not filter received multicast data packets based on source addresses or source and group addresses.

    If you specify a basic access control list (ACL) in the command, the industrial switch router forwards multicast data packets with group addresses permitted by the ACL.

    If you specify an advanced ACL in the command, the industrial switch router forwards multicast data packets with both source addresses and group addresses permitted by the ACL.

    NOTE:

    Source filtering policies do not filter multicast data packets of multicast groups or sources and groups statically bound to an interface.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 10828

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next