No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR500, AR510, and AR530 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IGMP On-Demand

Configuring IGMP On-Demand

Context

In a standard IGMP working process, the querier periodically sends Query messages and collects group membership information based on Report and Leave messages sent from hosts. If group members on a network seldom change, you can configure IGMP on-demand on the querier. IGMP on-demand enables the querier to maintain group memberships based on hosts' requirements, without sending Query messages. This function reduces the number of IGMP messages exchanged between the querier and hosts, conserving bandwidth on the network.

After you configure IGMP on-demand on an interface of the industrial switch router:

  • The interface no longer sends IGMP Query messages.
  • The industrial switch router creates IGMP group entries after receiving IGMP Report messages. The entries will never age out.
  • The industrial switch router deletes a group entry immediately after receiving an IGMP Leave message for the group.

IGMP on-demand applies only to IGMPv2 and IGMPv3.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface interface-type interface-number

    The interface view is displayed.

  3. Run:

    igmp on-demand

    IGMP on-demand is enabled on the interface. The interface no longer sends IGMP Query messages, and IGMP group entries on the interface will never age out.

    By default, an interface periodically sends Query messages and participates in querier election.

    NOTE:

    If dynamic IGMP entries have been generated on the querier, run the reset igmp group command to clear these dynamic IGMP entries before running the igmp on-demand command.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097280

Views: 10110

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next