No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Procedure

  • Run the display aaa configuration command to check the AAA summary.
  • Run the display authentication-scheme [ authentication-scheme-name ] command to check the authentication scheme configuration.
  • Run the display accounting-scheme [ accounting-scheme-name ] command to check the accounting scheme configuration.
  • Run the display service-scheme [ name name ] command to check the configuration about the service scheme.
  • Run the display radius-server configuration [ template template-name ] command to check the RADIUS server template configuration.
  • Run the display radius-server authorization configuration command to check the RADIUS authorization server configuration.
  • Run the display radius-attribute [ template template-name ] disable command to check the disabled RADIUS attributes.
  • Run the display radius-attribute [ template template-name ] translate command to check the RADIUS attribute translation configuration.
  • Run the display domain [ name domain-name ] command to check the domain configuration.
  • Run the display radius-server accounting-stop-packet { all | ip { ip-address | ipv6-address } } command to check the accounting-stop packets of the RADIUS server.
  • Run the display radius-attribute [ template template-name ] check command to check the attributes to be checked in RADIUS Access-Accept packets.
  • Run the display remote-user authen-fail [ blocked | username username ] command to check the accounts that fail in remote AAA authentication.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13315

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next