No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Tariff Level

Configuring the Tariff Level

Context

After identifying the traffic destined for different networks, the device associates traffic with tariff levels through traffic groups, based on which the device collects statistics and enforces policies on different types of traffic.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    traffic-group group-name

    A traffic group is created and the traffic group view is displayed.

    By default, no traffic group exists on the device.

  3. Run:

    acl acl-number tariff-level tariff-level

    The tariff level is configured.

    By default, no tariff level is configured.

    NOTE:
    • In a traffic group, you can specify tariff levels for a maximum of 8 ACLs.

    • Different ACLs can share the same tariff level.

  4. Run:

    quit

    Return to the system view.

  5. Run:

    traffic-group group-name enable

    The traffic group is applied to the device globally.

    By default, no traffic group is applied to the device.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 14742

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next