No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

This section provides the points of attention when configuring IPSG.

Involved Network Elements

Other network elements are not required.

License Support

IPSG is a basic feature of a router device and is not under license control.

Feature Dependencies and Limitations

When deploying IPSG on the router, pay attention to the following:
  • Among the AR500 series routers, AR502G-L-D-H, AR502GR-L-D-H do not support IPSG.

  • AR530&AR510 series do not support IPSG.

  • AR500 series (except AR502G-L-D-H, AR502GR-L-D-H) support only Layer 3 traffic monitoring.

Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13329

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next