No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing AAA Configuration

Clearing AAA Configuration


If the AAA configuration is cleared, the AAA-related services are disabled. Confirm your operation before clearing the AAA configuration. If the domain or service scheme configured for AAA is referenced by other modules, this domain or service scheme is not deleted, but the domain state is initialized. In this case, only the default authentication scheme and accounting scheme are bound, and the authorization scheme, RADIUS server, and HWTACACS server are not bound.

Run the following command in the system view to clear the AAA configuration.


  • Run the undo aaa command to clear the AAA configuration.
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13602

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next