No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Basic Principles

Basic Principles

DHCP snooping supports the listening function to record mappings between IP addresses and MAC (Media Access Control) addresses of DHCP clients.

After DHCP snooping is enabled, the device generates a DHCP snooping binding table by listening to DHCP Request messages and Reply messages. A binding entry contains the MAC address, IP address, interface number, and Virtual Location Area Network (VLAN) ID of the DHCP client.

The DHCP snooping binding entries are aged out when the DHCP release expires, or the entries are deleted when users send DHCP Release packets to release IP addresses.

The administrator needs to record IP addresses of DHCP clients and identify the mappings between the IP addresses and MAC addresses of the DHCP clients. The DHCP snooping binding table helps the administrator conveniently record the mappings.

NOTE:

The DHCP snooping binding table records the mapping between IP addresses and MAC addresses of DHCP clients. The device can check DHCP messages against the DHCP snooping binding table to prevent bogus DHCP message attacks.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 12880

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next