No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Does a Router Support the Binding of One Interface and Multiple IP Addresses

Does a Router Support the Binding of One Interface and Multiple IP Addresses

A router supports the binding of one interface and multiple IP addresses.
  • If you need to bind discontinuous IP addresses to an interface, enter 1-10 IP addresses in the command. For example, bind IP addresses 10.1.1.2, 10.1.1.5 and 10.1.1.12 to Eth0/0/1.
    <Huawei> system-view
    [Huawei] user-bind static ip-address 10.1.1.2 10.1.1.5 10.1.1.12 interface ethernet 0/0/1
    
  • If you need to bind continuous IP addresses to an interface, enter 1-10 IP address segments in the command. That entered IP address segments cannot overlap. For example, bind IP address segments 10.2.1.1-10.2.1.10 and 10.2.1.20-10.2.1.30 to Eth0/0/1.
    <Huawei> system-view
    [Huawei] user-bind static ip-address 10.2.1.1 to 10.2.1.10 10.2.1.20 to 10.2.1.30 interface ethernet 0/0/1
    
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13707

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next