No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Trusted CA Name and Enrollment URL

Configuring the Trusted CA Name and Enrollment URL


A trusted authentication authority enrolls and issues certificates to entities. Therefore, a trusted CA name and enrollment URL must be configured.

A registration authority (RA) receives registration requests from users, checks users' certificate credentials, and decides whether a CA can issue digital certificates to the users. An RA does not issue certificates to users and it only checks users' certificate credentials. Sometimes, a CA implements the registration management function and therefore no independent RA is required.

Before an entity requests a certificate, an enrollment URL must be specified. The entity requests a certificate using the Simple Certificate Enrollment Protocol (SCEP) with the server specified by the enrollment URL. SCEP is used by entities to communicate with CAs.


  1. Run:


    The system view is displayed.

  2. Run:

    pki realm realm-name

    The PKI domain view is displayed.

  3. Run:

    ca id ca-name

    A trusted CA name is configured.

    By default, no trusted CA is configured on the device.

  4. Run:

    enrollment-url url [ interval minutes ] [ times count ] [ ra ]

    An enrollment URL is configured.

    By default, no enrollment URL is configured on the device.

Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13562

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next