No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Defense Against DHCP Server DoS Attacks

Defense Against DHCP Server DoS Attacks

Mechanism

In Figure 12-1, if a large number of attackers request IP addresses on interface1, IP addresses in the IP address pool are exhausted, and there are no IP addresses for authorized users.

A DHCP server identifies the MAC address of a client based on the client hardware address (CHADDR) field in the DHCP Request message. If an attacker continuously applies for IP addresses by changing the CHADDR field, IP addresses in the address pool on the DHCP server may be exhausted. As a result, authorized users cannot obtain IP addresses.

Figure 12-1  Defense against DHCP server DoS attacks

Solution

To prevent the DHCP server DoS attacks, set the maximum number of access DHCP clients allowed on the device or an interface after enabling DHCP snooping on the device. When the number of DHCP clients reaches the maximum value, DHCP clients cannot obtain the IP address through the device or interface.

You can enable the device to check whether the MAC address in the Ethernet frame header matches the CHADDR field in the DHCP message. If the two values match, the message is forwarded; if not, the message is discarded.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13606

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next