No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring AAA Schemes

Configuring AAA Schemes

Context

To use local authentication and authorization, set the authentication mode in an authentication scheme to local authentication and the authorization mode in an authorization scheme to local authorization.

By default, the device performs local authentication and authorization for access users.

NOTE:

If non-authentication is configured using the authentication-mode command, users can pass the authentication using any user name or password. To protect the device and improve network security, you are advised to enable authentication, allowing only authenticated users to access the device or network.

Procedure

  • Configuring an authentication scheme
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      aaa

      The AAA view is displayed.

    3. Run:

      authentication-scheme authentication-scheme-name

      An authentication scheme is created, and the corresponding authentication scheme view or an existing authentication scheme view is displayed.

      By default, there is an authentication scheme named default on the device. The default authentication scheme can only be modified, but cannot be deleted.

    4. Run:

      authentication-mode local

      The authentication mode is set to local authentication.

      By default, local authentication is used.

    5. (Optional) Run:

      authentication-super [ hwtacacs | radius | super ] * none

      An authentication mode for upgrading user levels in an authentication scheme is configured.

      By default, the super mode is used. That is, local authentication is used.

    6. Run:

      quit

      The AAA view is displayed.

    7. (Optional) Run:

      domainname-parse-direction { left-to-right | right-to-left }

      The direction in which the user name and domain name are parsed is configured.

      By default, a domain name is parsed from left to right.

  • Configuring an authorization scheme
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      aaa

      The AAA view is displayed.

    3. Run:

      authorization-scheme authorization-scheme-name

      An authorization scheme is created, and the corresponding authorization scheme view or an existing authorization scheme view is displayed.

      By default, there is a default authorization scheme named default on the device. This default authorization scheme can be modified but cannot be deleted.

    4. Run:

      authorization-mode local [ none ]

      The authorization mode is configured.

      By default, local authorization is used.

    5. Run:

      quit

      The AAA view is displayed.

    6. (Optional) Run:

      authorization-modify mode { modify | overlay }

      The update mode of user authorization information delivered by the authorization server is configured.

      By default, the update mode of user authorization information delivered by the authorization server is overlay.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13738

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next