No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Manual Certificate Enrollment

Configuring Manual Certificate Enrollment

Prerequisites

A PKI domain has been created and configured. For details, see Configuring a PKI Domain.

Context

An entity can apply to a CA for a certificate online or offline. In offline enrollment mode, the entity provides the identity information and public key in outband mode.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    pki enroll-certificate pki-realm-name [ pkcs10 [ filename filename ] ]

    Manual certificate enrollment is configured.

    • If pkcs10 is specified, an entity applies to a CA for a certificate in offline mode. The entity saves the certificate request information in a file in PKCS#10 format and sends the file to the CA in outband mode.

    • If pkcs10 is not specified, an entity applies to a CA for a certificate in online mode.

    NOTE:

    When a certificate is enrolled manually, the CA certificate and local certificate are downloaded and saved in the default path automatically. Refer to Configuring the Default Path Where Certificates Are Stored to configure the default path.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13339

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next