No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing AAA Statistics

Clearing AAA Statistics

Context

The AAA statistics cannot be restored after being cleared. Confirm your operation before clearing the AAA statistics.

Run the following commands to clear the statistics.

Procedure

  • Run the reset aaa { offline-record | online-fail-record } command in the system view to clear the offline records and login failures statistics.
  • Run the reset aaa statistics offline-reason command in any view to clear the statistics about reasons why users go offline.
  • Run the reset hwtacacs-server statistics { accounting | all | authentication | authorization } command in the user view to clear the statistics on HWTACACS authentication, accounting, and authorization.
  • Run the reset hwtacacs-server accounting-stop-packet { all | ip { ip-address | ipv6-address } } command to clear statistics on the remaining buffer information of HWTACACS accounting-stop packets.
  • Run the reset radius-server accounting-stop-packet { all | ip { ip-address | ipv6-address } } command to clear statistics on the remaining buffer information of RADIUS accounting-stop packets.
  • Run the reset local-user [ user-name ] password history record command in the AAA view to clear historical passwords of local users.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13599

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next