No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Default Path Where Certificates Are Stored

Configuring the Default Path Where Certificates Are Stored

Context

You can configure the default path where certificate files are stored.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    pki credential-storage local-dir

    The default path and directory where the CA certificate, local certificate, and private key are stored are configured.

    By default, the CA certificate, local certificate, and private key are stored in flash:/.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13165

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next