No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Event Reporting Function

Configuring Event Reporting Function

Context

This function sends an event report to the administrator when the rate of packets of a specified protocol sent by an attack source exceeds the configured threshold, so that the administrator can take measures in time to protect the device.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    cpu-defend policy policy-name

    The attack defense policy view is displayed.

  3. Run:

    auto-defend enable

    Attack source tracing is enabled.

    By default, attack source tracing is disabled.

  4. Configure the event reporting function for attack source tracing.
    1. Run:

      auto-defend alarm enable

      The event reporting function for attack source tracing is enabled.

      By default, the event reporting function for attack source tracing is disabled.

    2. Run:

      auto-defend alarm
      threshold threshold

      The event reporting threshold for attack source tracing is set.

      By default, the event reporting threshold for attack source tracing is 128 pps.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13675

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next