No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Whitelist Entry

Configuring a Whitelist Entry

Context

The whitelist prevents specified IP addresses from being added to the blacklist. The IP addresses in the whitelist will not be added to the blacklist statically or dynamically. An entry in the whitelist is identified by a source VPN and a source IP address.

You can specify the IP address, aging time, and VPN instance when adding an entry to the whitelist. The aging time refers to amount of time the IP address is effective in the whitelist. When the aging time expires, the IP address is released from the whitelist. If the aging time is not specified, the IP address is always valid in the whitelist.

Entries in the whitelist take effect directly and you do not need to enable the whitelist function.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    firewall whitelist ip-address [ vpn-instance vpn-instance-name ] [ expire-time minutes ]

    An entry is added to the whitelist.

  3. (Optional) Run:

    firewall black-white-list save configuration-file configuration-file-name

    The blacklist and whitelist are saved to the specified configuration file. You can use the blacklist and whitelist later by loading this configuration file.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13573

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next