No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Rate Limit for Packets Sent to the CPU

Configuring the Rate Limit for Packets Sent to the CPU

Context

The device applies different rate limits to packets of different types or discards packets of a specified type to protect the CPU.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    cpu-defend policy policy-name

    The attack defense policy view is displayed.

  3. Configure a rate limit for packets sent to the CPU.

    • Run:
      packet-type packet-type rate-limit rate-value

      The rate limit for packets sent to the CPU is set. Excess packets are discarded.

    • Run:
      deny packet-type packet-type

      The device is configured to discard packets of a specified type sent to the CPU. That is, the rate limit for packets sent to the CPU is 0.

    By default, the device applies the rate limit defined in the default attack defense policy to limit the packets sent to the CPU.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13485

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next