No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring PKI Entity Attributes

(Optional) Configuring PKI Entity Attributes

Context

In addition to configuring a common name for a PKI entity, you can configure the fully qualified domain name (FQDN), country code, state name or province name, and department name for the PKI entity to identify this PKI entity.

NOTE:

The PKI entity attributes except FQDN support uppercase letters, lowercase letters, numerals, spaces, and special characters including ' = ( ) + . - / : .

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    pki entity entity-name

    The PKI entity view is displayed.

  3. Run:

    fqdn fqdn-name

    A FQDN is configured for the PKI entity.

    By default, no FQDN is configured on the device.

  4. Run:

    country country-code

    A country code is configured for the PKI entity.

    By default, no country code is configured for a PKI entity.

  5. Run:

    locality locality-name

    A geographic area is configured for the PKI entity.

    By default, no geographic area is configured for a PKI entity on the device.

  6. Run:

    state state-name

    A state name or province name is configured for the PKI entity.

    By default, no state name or province name is configured for a PKI entity.

  7. Run:

    organization organization-name

    An organization name is configured for the PKI entity.

    By default, no organization name is configured for a PKI entity.

  8. Run:

    organization-unit organization-unit-name

    A department name is configured for the PKI entity.

    By default, no department name is configured for a PKI entity.

  9. Run:

    ip-address { ip-address | interface-type interface-number }

    An IP address is configured for the PKI entity.

    By default, no IP address is configured for a PKI entity.

  10. Run:

    serial-number

    The serial number of a device is added to the PKI entity.

    By default, the serial number of a device is not added to the PKI entity.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 12546

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next