No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Security

AR500, AR510, and AR530 V200R007

This document describes the configurations of Security, including AAA, DAA,NAC, BRAS Access, ACL, Firewall, Deep Security Defense, Local Attack Defense;Attack Defense, Traffic Suppression, ARP Security, Port Security, DHCP Snooping, IPSG, URPF, PKI, SSL, HTTPS, Keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Procedure

  • Run the display aaa configuration command to check the AAA summary.
  • Run the display authentication-scheme [ authentication-scheme-name ] command to check the authentication scheme configuration.
  • Run the display authorization-scheme [ authorization-scheme-name ] command to check the authorization scheme configuration.
  • Run the display access-user [ domain domain-name | interface interface-type interface-number [ vlan vlan-id [ qinq qinq-vlan-id ] ] | ip-address ip-address [ vpn-instance vpn-instance-name ] | mac-address mac-address | slot slot-id | ssid ssid-name | user-id user-number ] command to check the summary of all online users.
  • Run the display domain [ name domain-name ] command to check the domain configuration.
  • Run the display local-user [ domain domain-name | state { active | block } | username username ] * command to check the brief information about local users.
  • Run the display local-user password policy { access-user | administrator } command to display the password policy of local user.
  • Run the display local-user expire-time command to display the time when local accounts expires.
Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097287

Views: 13498

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next