No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The ipaddress command configures the IP address of the file server.

The undo ipaddress command deletes the IP address of the file server.


ipaddress ip

undo ipaddress


Parameter Description Value
ip Specifies the IP address of the file server. The value is in dotted decimal notation.


Autostart view

Default Level

3: Management level

Usage Guidelines

Before using Auto-Start to deploy or upgrade a device, run this command to configure the IP address of the file server. After the IP address is configured, the device can connect to the corresponding file server based on the IP address and download site deployment files.


# Configure the IP address for the file server.

<Huawei> system-view
[Huawei] autostart
[Huawei-autostart] ipaddress
Info: Set ip address successfully.
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 133728

Downloads: 142

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next