No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN Roaming Commands

WLAN Roaming Commands

display station roam-track


The display station roam-track command displays the roaming track of a STA.


display station roam-track sta mac-address





sta mac-address

Specifies the MAC address of the specified STA.

The value is in H-H-H format. An H is a hexadecimal number of four digits.


All views

Default Level

1: Monitoring level

Usage Guidelines

During the roaming process of a STA, the AC records the STA's roaming track (that is, information about the APs that the STA connects to). You can run the display station roam-track command to view the roaming track of the STA.


# Display the roaming track of the STA with the MAC address 0011-43c7-d73e.

<Huawei> display station roam-track sta 0011-43c7-d73e
  AP ID  Radio ID  BSSID            TIME                                        
  0      0        60de-4476-f620   2012/12/23 14:40:37                          
  1      0        60de-4476-f680   2012/12/23 14:40:39                          
  Number of roam track: 1   
Table 12-66  Description of the display station roam-track command output




ID of an AP that the STA connects to.

Radio ID

Radio ID of an AP that the STA connects to.


BSSID of an AP that the STA connects to.


Time when the STA connects to an AP.

Number of roam track

Number of times roaming track of a STA is recorded.

Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 89782

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next