No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
shutdown interval

shutdown interval

Function

The shutdown interval command sets the minimum interval for re-enabling an interface.

The undo shutdown interval command restores the default minimum interval for re-enabling an interface.

By default, the minimum interval for re-enabling an interface is 0 seconds.

Format

shutdown interval interval-value

undo shutdown interval

Parameters

Parameter

Description

Value

interval-value

Specifies the minimum interval for re-enabling an interface.

The value is an integer that ranges from 5 to 15, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In some cases, for example, when parameters of an interface are modified but the modification does not take effect immediately, run the shutdown and undo shutdown commands to re-enable the interface. Then the modification can take effect. To shorten the waiting time, run the shutdown interval command to set the minimum interval for re-enabling an interface.

Precautions

  • The minimum interval configured using this command also applies to the restart command.

Example

# Set the minimum interval for re-enabling an interface to 5 seconds.

<Huawei> system-view
[Huawei] shutdown interval 5
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 91503

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next