No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ipsec statistics

display ipsec statistics

Function

The display ipsec statistics command displays statistics about IPSec packets.

Format

display ipsec statistics { ah | esp }

Parameters

Parameter

Description

Value

ah

Displays statistics about IPSec packets of the AH protocol.

The AR510 series do not support this parameter.

-

esp

Displays statistics about IPSec packets of the ESP protocol.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display statistics about IPSec packets of the AH protocol.

<Huawei> display ipsec statistics ah
 Inpacket count            : 0
 Outpacket count           : 0
 Inpacket drop count       : 0
 Outpacket drop count      : 0
 BadAuthLen count          : 0
 AuthFail count            : 0
 InSAAclCheckFail count    : 0 
 PktDuplicateDrop count    : 0
 PktSeqNoTooSmallDrop count: 0
 PktInSAMissDrop count     : 0  

# Display the statistics about IPSec packets of the ESP protocol.

<Huawei> display ipsec statistics esp
 Inpacket count            : 0
 Inpacket auth count       : 0
 Inpacket decap count      : 0
 Outpacket count           : 0
 Outpacket auth count      : 0
 Outpacket encap count     : 0
 Inpacket drop count       : 0
 Outpacket drop count      : 0
 BadAuthLen count          : 0
 AuthFail count            : 0
 InSAAclCheckFail count    : 0 
 PktDuplicateDrop count    : 0
 PktSeqNoTooSmallDrop count: 0
 PktInSAMissDrop count     : 0      
Table 10-36  Description of the display ipsec statistics command output

Item

Description

Inpacket / Outpacket count

Number of incoming and outgoing IPSec packets.

Inpacket / Outpacket drop count

Number of discarded incoming and outgoing IPSec packets.

Inpacket auth count

Number of incoming packets that require authentication but not decryption.

Inpacket decap count

Number of incoming packets that require decryption but not authentication.

Outpacket auth count

Number of outgoing packets that require authentication but not decryption.

Outpacket encap count

Number of outgoing packets that require decryption but not authentication.

BadAuthLen count

Number of authentication failures caused by the invalid length of AH headers.

AuthFail count

Number of authentication failures.

InSAAclCheckFail count

Number of failures to perform ACL check for decapsulated IPSec packets.

PktDuplicateDrop count

Number of discarded duplicate packets.

PktSeqNoTooSmallDrop count:

Number of packets discarded because of insufficient size of the sliding window.

PktInSAMissDrop count

Number of inbound miss packets.

Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90882

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next