No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interface

interface

Function

The interface command displays the interface view or sub-interface view.

Format

interface interface-type interface-number

Parameters

Parameter Description Value
interface-type interface-number

Specifies the type and number of an interface. The interface type and number can be closely next to each other or separated by a space character.

  • To create a sub-interface or enter a sub-interface view, specify interface-number in the format of main interface number.sub-interface number. For example, the number of sub-interface 1 on GE1/0/0 is GE1/0/0.1.
  • To create a channelized interface or enter the view of a channelized interface, specify interface-number in the format of main interface number:channelized interface number.
-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the specified interface view is displayed, you can set attributes for the interface.

Precautions

  • The interface command can display only the view of an existing physical interface and cannot create a physical interface.

  • The interface command can create a logical interface and display the view of the logical interface.

Example

# Display the view of Eth0/0/1.

<Huawei> system-view
[Huawei] interface ethernet 0/0/1
[Huawei-Ethernet0/0/1]
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 92004

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next