No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display poe information

display poe information


The display poe information command displays PoE running information on the device.


display poe information



Usage Guidelines

You can use this command to check PoE running information, such as the configured maximum output power, current power consumption, peak power consumption, and power management mode.


# Display PoE running information on the device.

[Huawei] display poe information
Power Max      Value(mW) : 130000                                               
Power Peak     Value(mW) : 0                                                    
Power Current  Value(mW) : 0                                                    
Total Reference Power(mW): 0                                                    
Power-Management mode    : Auto 
Table 3-59  Description of the display poe information command output



Power Max Value(mW)

Maximum power configured for a board.

To configure this parameter, run the poe power-max command.

Power Peak Value(mW)

Peak power consumption of a board.

Power Current Value(mW)

Current power consumption of a board.

Total Reference Power(mW)

Total reference power of all PDs connected to a board.

Power-Management mode

Power management mode: automatic or manual.

To configure this parameter, run the poe power-management command.

Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90735

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next