No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

AR500, AR510, and AR530 V200R007

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
username

username

Function

The username command configures the user name and password for accessing the file server.

The undo username command deletes the user for accessing the file server.

By default, no user is configured for accessing the file server.

Format

username username password password

undo username username

Parameters

Parameter Description Value
username Specifies the user name for accessing the file server. The value is a string of 1 to 64 case-insensitive characters without spaces. It can contain special characters.
password Specifies the password corresponding to the user name for accessing the file server. The value is a string of case-sensitive characters without spaces. It can be a string of 1 to 32 characters in plain text, or a string of 80 characters in cipher text.

Views

Autostart view

Default Level

3: Management level

Usage Guidelines

Before using Auto-Start to deploy or upgrade a device, run this command to configure the user name and password for accessing the file server. After the user name and password are configured, the device can be authenticated by and connect to the file server.

Example

# Set the user name and password for accessing the file server to admin and huawei, respectively.

<Huawei> system-view
[Huawei] autostart
[Huawei-autostart] username admin password huawei
Info: Set user name and password successfully.
Translation
Download
Updated: 2019-02-18

Document ID: EDOC1000097293

Views: 35300

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next