No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display http server

display http server

Function

The display http server command displays information about the current HTTP server.

Format

display http server

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

You can view the HTTP server information, including the status of common and security HTTP services, port number, maximum number of users allowed to access the HTTP server, and number of current online users.

Example

# Display information about the current HTTP server.

<Huawei> display http server
  HTTP server status    : Enabled        (default: disable)       
  HTTP server port      : 80             (default: 80)                          
  HTTP timeout interval : 3              (default: 10 minutes)                   
  Current online users  : 0                                                     
  Maximum users allowed : 5                                                     
  HTTPS server status   : Disabled       (default: disable)                     
  HTTPS server port     : 443            (default: 443)                         
  HTTPS SSL Policy      :     
Table 2-34  Description of the display http server command output

Item

Description

HTTP server status

Status of the common HTTP server.
  • Enabled: The HTTP service is enabled.
  • Disabled: The HTTP service is disabled.

You can configure the common HTTP server status by running the http server enable command.

HTTP server port

Number of the listening port on the HTTP server. The default port number is 80.

You can configure the HTTP server port number by running the http server port command.

HTTP timeout interval

Idle timeout duration of the HTTP server. The default value is 10 minutes.

You can configure the idle timeout duration by running the http timeout command.

Current online users

Number of current online users.

Maximum users allowed

Maximum number of users allowed to access the HTTP server.

You can configure the maximum number of users by running the http server max-online-users command.

HTTPS server status

Status of the security HTTP server.
  • Enabled: The security HTTP service is enabled.
  • Disabled: The security HTTP service is disabled.

You can configure the security HTTP server status by running the http secure-server enable command.

HTTPS server port

Port number of the security HTTP server. The default value is 443.

You can configure the security HTTP server port number by running the http secure-server port command.

HTTPS SSL Policy

security HTTP SSL policy.

You can configure the security HTTP SSL policy by running the ssl policy command.

Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 89784

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next