No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
http timeout

http timeout


The http timeout command sets the idle timeout duration of the web server.

The undo http timeout command restores the default idle timeout duration of the webHTTP server.

By default, the idle timeout duration of the web server is 10 minutes.


http timeout timeout

undo http timeout


Parameter Description Value
timeout Specifies the idle timeout duration of the web server for online users. The value is an integer that ranges from 1 to 35791, in minutes.


System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

A maximum of five web users are supported at present. When the fifth web user logs in to the web server, any other user cannot log in to the web server even if any of the five users does not perform operations for a long time. The idle timeout duration is configured to release web resources in time. To occupy web channels for a long time, you must set the idle timeout duration to the maximum value.


  • After you run the http timeout command, the idle timeout durations are the same for all web users who log in to the web server. If the idle timeout duration expires, a user is disconnected from the web server and the web server notifies the user only after the user sends the next login request.

  • If the http timeout command is configured several times, only the latest configuration takes effect.


# Set the idle timeout duration of the webHTTP server to 6 minutes.

<Huawei> system-view
[Huawei] http timeout 6
Related Topics
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 151325

Downloads: 168

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next