No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
telnet server port

telnet server port

Function

The telnet server port command configures the listening port number of a Telnet server.

The default listening port of a Telnet server is 23.

Format

telnet server port port-number

Parameters

Parameter Description Value
port-number Specifies the listening port number of a Telnet server. The value is an integer that is 23 or ranges from 1025 to 55535. The default value 23 is the standard Telnet server port number.

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To protect the Telnet standard port against attacks and ensure network security, configure the listening port number of the Telnet server.

Precautions

A Telnet client can log in to the server with no port specified only when the server is listening on port 23. If the server is listening on another port, the port number must be specified upon login.

Before changing the current port number, disconnect all devices from the port. After the port number is changed, the server starts to listen on the new port.

Example

# Configure the listening port number to 1026.

<Huawei> system-view
[Huawei] telnet server port 1026
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 52775

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next