No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rule description

rule description


The rule description command configures the description of an ACL rule.

The undo rule description command deletes the description of an ACL rule.

By default, no description is configured for an ACL rule.


rule rule-id description description

undo rule rule-id description






Specifies the ID of an ACL rule.

The value is an integer that ranges from 0 to 4294967294.

description description

Specifies the description of an ACL rule.

You can configure the description to record an ACL rule in detail.

The value is a character string and contains a maximum of 127 characters.


ACL view, ACL6 view

Default Level

2: Configuration level

Usage Guidelines

Application Scenarios

The rule-id parameter identifies a rule, but cannot describe the meaning and usage of the rule. The description with a character string can be used to solve the problem.


The ACL rule has been created. If the ACL rule does not exist, the system displays an error message when you run this command.


If the rule description command is run repeatedly, the latest configuration takes effect.

After you run the undo rule rule-id command, the rule and rule description are deleted.


# Configure the description for rule 5 in acl 2001, which permits the packets from

<Huawei> system-view
[Huawei] acl 2001
[Huawei-acl-basic-2001] rule 5 permit source 0
[Huawei-acl-basic-2001] rule 5 description permit
[Huawei-acl-basic-2001] display acl 2001
Basic ACL 2001, 1 rule
Acl's step is 5
 rule 5 permit source 0
 rule 5 description permit
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 136077

Downloads: 148

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next