No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

AR500, AR510, and AR530 V200R007

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display poe power port

display poe power port

Function

The display poe power port command displays current power information on ports.

Format

display poe power port { port-num | all }

Parameters

Parameter

Description

Value

port-num Specifies the port number of a PoE midspan. The value is an integer that ranges from 0 to 7.
all Indicates all port numbers of a PoE midspan.

Usage Guidelines

The display poe power port command displays port information, including the actual output power and configured maximum output power of ports as well as class, reference power, and average power of PDs connected to ports.

Example

# Display power information on port 0.
[Huawei] display poe power port 0
Port PD class               : 4                                                 
Port PD power(mW)           : 0                                                 
Port PD reference power(mW) : 30000                                             
Port user set max power(mW) : 20000                                             
Port PD peak power(mW)      : 0                                                 
Port PD average power(mW)   : 0  
Table 3-62  Description of the display poe power port command output

Item

Description

Port PD class

Class of a PD, which assesses the power required by the PD.

The system classifies PDs into five classes, class 0 to class 4, based on their maximum power.

Port PD power(mW)

Output power of the PD.

Port PD reference power(mW)

Reference power of the PD, in mW.

The system can identify the reference power of each PD. The value varies depending on PD types. The mapping between PD classes and the reference power is as follows:

  • 0: The reference power is 15.4 W.
  • 1: The reference power is 4 W.
  • 2: The reference power is 7 W.
  • 3: The reference power is 15.4 W.
  • 4: The reference power is 30 W.

Port user set max power(mW)

Maximum output power configured for the port, in mW.

To configure this parameter, run the poe power port command.

Port PD peak power(mW)

Peak power of the PDs connected to the port, in mW.

The value is a statistical value, which equals the current maximum power consumption of the PDs connected to the port.

Port PD average power(mW)

Average power of the PDs connected to the port, in mW.

The value is a statistical value, which equals the average power consumption from the power-on of the port till now.

Translation
Download
Updated: 2019-02-18

Document ID: EDOC1000097293

Views: 36262

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next