No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ipsec interface brief

display ipsec interface brief


The display ipsec interface brief command displays IPSec policies referenced on an interface.


display ipsec interface brief




All views

Default Level

1: Monitoring level

Usage Guidelines



# Display IPSec policies referenced on an interface.

<Huawei> display ipsec interface brief
IPSec Interface Brief:                                                          
  IPSec policy        : policy1                                                    
  Using interface     : GigabitEthernet0/0/1
  IPSec policy number : 10                                                       
  IPSec policy Type   : policy                                           
Table 10-27  Description of the display ipsec interface brief command output



IPSec policy

Name of the IPSec policy referenced on an interface. To apply an IPSec policy to an interface, run the ipsec policy (interface view), ipsec profile (interface view), or ipsec efficient-vpn (interface view) command.

Using interface

Interface to which an IPSec policy is applied.

IPSec policy number

Sequence number of the IPSec policy referenced on the interface. To configure an IPSec policy, run the ipsec policy (system view) or ipsec profile (system view) command.

IPSec policy Type

Type of the IPSec policy referenced on an interface:
  • policy: IPSec policy in manual or IKE negotiation mode
  • profile: IPSec profile
  • template: IPSec policy template
  • efficient-vpn: Efficient VPN policy
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 146586

Downloads: 157

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next