No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The send command sends messages to all user interfaces.


send { all | ui-number | ui-type ui-number1 }


Parameter Description Value
all Specifies that the system sends messages to all user interfaces. -
ui-number Specifies the absolute number of the user interface. The minimum value is 0. The maximum value is smaller by 1 than the number of the user interfaces that the system supports.
ui-type Specifies the type of the user interface. -
ui-number1 Specifies the relative number of the user interface. -


User view

Default Level

1: Monitoring level

Usage Guidelines

After you run the send command, the system prompts you to enter the message to send. After you confirm to send this message, the user who logs in to the system from the specified user interface can receive this message.


# Send a message to the user interface VTY 0.

<Huawei> send vty 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:Hello, good morning!^Z
Warning: Send the message? [Y/N]: y

# After you confirm to send the message, the user who logs in to the Huawei from VTY 0 can receive this message.

Info: Receive a message from VTY2:Hello, good morning!
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 91992

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next