No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display rollback state

display rollback state


The display rollback state command displays the rollback status of the system.


display rollback state




All views

Default Level

1: Monitoring level

Usage Guidelines

This command enables you to:

  • Check whether the rollback function is enabled.
  • Preview the files used after a version rollback to avoid an unexpected rollback.
  • The rollback status can be displayed only if the rollback command can be used. Therefore, the display rollback state command can display the rollback status only when the following conditions are met: the system software for rollback exists, the current software package is different from the previous system software package, and no new package is specified for next startup using the startup system-software command.
  • If no rollback system software exists, a message "Rollback function is disabled in current state" will be displayed when you run the display rollback state command.


# Preview the files used after a version rollback. The names and paths of various startup files used in the rollback version are displayed if the rollback function is enabled in the system.

<Huawei> display rollback state
Rollback function is enabled in current state                                   
The booting parameters for rollback are as follows:                             
  Rollback system software:                  flash:/    
  Rollback saved-configuration file:         flash:/         
  Rollback license file:                     null                               
  Rollback patch package:                    null                               
  Rollback voice-files:                      null                               
Table 2-61  Description of the display rollback state command output



Rollback system software

System software package used after the rollback.

Rollback saved-configuration file

Configuration file used after the rollback.

Rollback license file

License file used after the rollback.

Rollback patch package

Patch file used after the rollback.

Rollback voice-files

Voice file used after the rollback.

Related Topics
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 134806

Downloads: 142

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next